Quicklock Base, 10 Foot
SUR1004
QuickLock is our extruded aluminum poly locking device. It is designed to provide an attractive and efficient method of securing either single or double layers of poly greenhouse film. The base is screwed onto the baseboard of your greenhouse, as well as the end arches if desired. Then, the poly is laid over the base, pulled down to remove wrinkles, and then the top cap is snapped into place. Over 300 lbs. holding power per lineal foot. The base and cap come in 10' lengths. The QuickLock is fastened to a wood baseboard with #10 x 1-1/4" tek screws. If fastening it to steel arches, such as around the end bow, use our #12 x 3/4" tek screws. To finish the job, you’ll need a rubber mallet to assist you in snapping on the top cap and a hex head bit for the tek screws. Contact us for more information on our aluminum greenhouse frame parts.
Pairs well with
Quicklock Base, 10 Foot
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
DESCRIPTION:
QuickLock is our extruded aluminum poly locking device. It is designed to provide an attractive and efficient method of securing either single or double layers of poly greenhouse film. The base is screwed onto the baseboard of your greenhouse, as well as the end arches if desired. Then, the poly is laid over the base, pulled down to remove wrinkles, and then the top cap is snapped into place. Over 300 lbs. holding power per lineal foot. The base and cap come in 10' lengths. The QuickLock is fastened to a wood baseboard with #10 x 1-1/4" tek screws. If fastening it to steel arches, such as around the end bow, use our #12 x 3/4" tek screws. To finish the job, you’ll need a rubber mallet to assist you in snapping on the top cap and a hex head bit for the tek screws. Contact us for more information on our aluminum greenhouse frame parts.